Donaldson Mobile Tank Breather Anti-Splash TRAP 1
GO Donaldson TRAP Breathers how they work
Donaldson TRAP v Desiccant Breathers
  • Donaldson Mobile Tank Breather Anti-Splash TRAP 1" P766646
  • GO Donaldson TRAP Breathers how they work
  • Donaldson TRAP v Desiccant Breathers
1 4

Moisture Meets It's Match

Donaldson T.R.A.P.™ breathers, from GO Industrial, collect and expel moisture out of tanks and drums. This means you won’t need to change the breather due to water saturation, unlike desiccant filters which require frequent change-out.

Donaldson TRAP water and particulate before it gets in without restricting air flow − letting your tanks or drums breathe easy.

How It Works

T.R.A.P.™ breathers from Donaldson are the only breathers on the market that literally strip moisture vapour from intake air and expel the moisture back to the atmosphere on the outflow cycle. The filter continuously regenerates its water holding capacity!

  1. The circuit “breathes in” air containing moisture vapour.
  2. The T.R.A.P. breather strips moisture and particulate from the incoming air, allowing only clean, dry air to enter the circuit.
  3. During the “exhalation” cycle, the T.R.A.P breather allows unrestricted airflow outward.
  4. The outflow of dry air picks up the moisture collected by the T.R.A.P breather during intake, and “blows it back out” – fully regenerating the T.R.A.P breather’s water-holding capacity.

Thermally Reactive Advanced Protection (T.R.A.P.™)

Water has a way of sneaking into your storage tanks / hydraulic circuits − unless you have a Donaldson T.R.A.P. breather standing guard over your system.

Donaldson’s T.R.A.P. breather removes moisture at relative humidity levels as low as 15%. T.R.A.P. filtration technology reacts instantly to changes in thermal conditions − blocking moisture.

T.R.A.P. breathers strip moisture vapour from intake air and release it back into the atmosphere on the outflow cycle. The filter continuously regenerates its water holding capacity. T.R.A.P. breathers expel the moisture back out, eliminating the need to change the breather due to water saturation - unlike desiccant filters that require frequent change-out. T.R.A.P. breathers not only protect against moisture but also provide advanced particulate filtration.

TRAP water before it gets in without restricting air flow, letting your hydraulic and lube oil reservoirs BREATHE.

  • GO Data Sheet Donaldson P766646
  • GO Data Sheet Donaldson TRAP Breather Range
    • DN25 (1") Male BSP Thread
    • Mobile Anti-Splash Design
    • 72.9mm high

Donaldson Mobile Tank Breather Anti-Splash TRAP DN25 (1") BSP P766646

SKU: P766646

Donaldson Mobile Tank Breather Anti-Splash TRAP DN25 (1") BSP P766646

$91.00 NZD
$91.00 NZD
Save $0
Sold out
Inclusive of GST.

Other payment options

The Basics

The Donaldson P766646 DN25 (1") Filtered Breather, from GO Industrial, is designed for mobile applications for installation on hydraulic, lubricants and fuel tanks.  The P766646 is designed with an anti-splash feature that ensures fluid is not lost as a result of the turbulence created when fluid is being transported. 

For every litre of liquid that you dispense from a tank or drum, a litre of air enters the vessel.  This air entering your tank or drum is laden with moisture and dust.  The Donaldson TRAP Breather will filter the moisture and dust from the air entering your tank or drum, ensuring the cleanliness and purity of the liquid being stored.     

Moisture Meets It's Match

Donaldson T.R.A.P.™ breathers, from GO Industrial, collect and expel moisture out of tanks and drums. This means you won’t need to change the breather due to water saturation, unlike desiccant filters which require frequent change-out.

Donaldson TRAP water and particulate before it gets in without restricting air flow − letting your tanks or drums breathe easy.

How It Works

T.R.A.P.™ breathers from Donaldson are the only breathers on the market that literally strip moisture vapour from intake air and expel the moisture back to the atmosphere on the outflow cycle. The filter continuously regenerates its water holding capacity!

  1. The circuit “breathes in” air containing moisture vapour.
  2. The T.R.A.P. breather strips moisture and particulate from the incoming air, allowing only clean, dry air to enter the circuit.
  3. During the “exhalation” cycle, the T.R.A.P breather allows unrestricted airflow outward.
  4. The outflow of dry air picks up the moisture collected by the T.R.A.P breather during intake, and “blows it back out” – fully regenerating the T.R.A.P breather’s water-holding capacity.

Thermally Reactive Advanced Protection (T.R.A.P.™)

Water has a way of sneaking into your storage tanks / hydraulic circuits − unless you have a Donaldson T.R.A.P. breather standing guard over your system.

Donaldson’s T.R.A.P. breather removes moisture at relative humidity levels as low as 15%. T.R.A.P. filtration technology reacts instantly to changes in thermal conditions − blocking moisture.

T.R.A.P. breathers strip moisture vapour from intake air and release it back into the atmosphere on the outflow cycle. The filter continuously regenerates its water holding capacity. T.R.A.P. breathers expel the moisture back out, eliminating the need to change the breather due to water saturation - unlike desiccant filters that require frequent change-out. T.R.A.P. breathers not only protect against moisture but also provide advanced particulate filtration.

TRAP water before it gets in without restricting air flow, letting your hydraulic and lube oil reservoirs BREATHE.

  • GO Data Sheet Donaldson P766646
  • GO Data Sheet Donaldson TRAP Breather Range
    • DN25 (1") Male BSP Thread
    • Mobile Anti-Splash Design
    • 72.9mm high
View full details
    pagination here

Recently Viewed Products